Reduce Your Operating Costs Over The Life Of Your System
Prevent a system failure and expensive reapairs
Lower your utility bills & save with members only discounts
Extend the life of your plumbing and HVAC systems
Save energy and keep your home comfort systems running at peak performance with our incredible Energy Saver Plan.
Congratulations
Congratulations on the purchase of your beautiful new home. Your home’s HVAC, plumbing, and electrical systems need regular service, just like your cars. Here is your chance to get a Home Maintenance Agreement from the company you know, and that knows your home. MEP Home Services installed the HVAC, plumbing, and electrical systems in your new home and is ready to serve you again.
Protect Your Home’s Mechanical Systems
Return your comfort system to “Factory Fresh” conditions. When you invest in this incredible Energy Saver Plan, we will provide you with:
HVAC + Water Heater Energy Saver Plan Overview:
Price: $34/month or $414/year
Maintenance Inspection Details:
- Inspect & Evaluate Burner Assembly to improve combustion.
- Tune Burners for more efficient burns, saving energy.
- Inspect & Evaluate Ignition Assembly to ensure reliable operation on demand.
- Inspect & Evaluate Heat Section to ensure safe operation and the absence of cracks from metal fatigue.
- Verify Flue Draft to ensure dangerous gas by-products are properly venting to the outdoors and flue pipes are free from obstruction.
- Inspect Flue Pipe to ensure no corrosion is present.
- Calibrate Thermostat for accurate control.
- Test Refrigerant Charge to ensure optimum levels and extend compressor life.
- Test Capacitors to ensure reliable operation and continued compressor and motor protection.
- Inspect & Evaluate Control & Safeties to keep operating costs low and prevent future failures.
- Test Defrost Cycle.
- Adjust Balancing Dampers to improve comfort.
- Clean or Replace Customer Supplied Filters to reduce energy use, reduce compressor strain, improve indoor air quality, and improve comfort.
- Check Air Flow to ensure proper air flow across the coil for proper humidity removal.
- Visually Inspect Ductwork to identify obvious leaks.
- Tighten Electrical Connections to ensure uninterrupted system operation.
- Measure & Record Voltage & Amperage to identify baseline operating conditions.
- Lubricate All Moving Parts to maintain efficiency and extend equipment life.
- Check Inside Evaporator Coil for cleanliness and operation.
- Clean Condensate Drains to prevent water damage and the potential for mold formation.
- Inspect & Evaluate Blower Assembly for cleanliness and operation.
- Apply Protective Coating to the outside unit to protect the finish.
*Flush water heater coils with Food Grade Cleaning or descaler solution
*Clean filter/grill vents
*Check venting for any obstructions
*Check for proper operation of water heater
*Visually inspect to detect leaks
*Drain water heater to remove sediment and calcium buildup
*Check venting for any obstructions
*Visually inspect to detect leaks
*Check for proper operation of the water heater
Yes! I want the incredible Energy Saver Plan!
Thank you for joining our Maintenance Plan!
For questions, please contact our office at (888) 555-5585 or moc.srentrappem@ecivres.